KS100 Coriolis Mass Flow Meter
Summary:
Coriolis mass flow meters are highly regarded for their measurement accuracy and insensitivity to fluid properties. The KS100 features a uniquely shaped single-loop sensor that forms part of an oscillating system. As the fluid flows through the sensor loop, Coriolis forces induce a variable phase shift, which is detected by the sensor and transmitted to a DSP processor on the integrated circuit board for computation. The resulting output signal, directly proportional to the actual mass flow rate, delivers unparalleled high performance even under varying process conditions such as changes in pressure, temperature, density, conductivity, and viscosity. The KS100 simultaneously measures mass flow rate, fluid density, and temperature, and outputs all three parameters. The KS100 series of mass flow measurement instruments offers two accuracy classes: ±0.25% for liquid measurements and ±0.5% for gas measurements. This level of accuracy is sufficient to meet the needs of most customers, making the instrument suitable for both laboratory testing and demanding industrial applications. To accommodate challenging industrial environments, certain models are certified to IP67 for dust and water resistance and to IICT4 for intrinsically safe explosion protection. In addition to standard analog input/output interfaces, the KS100 also supports RS-485 and RS-232 communication, using the standard Modbus RTU protocol.
Keywords:
Category:
Coriolis mass flow meters are highly regarded for their measurement accuracy and insensitivity to fluid properties. The KS100 features a uniquely shaped single-loop sensor that forms part of an oscillating system. As the fluid flows through the sensor loop, Coriolis forces induce a variable phase shift, which is detected by the sensor and transmitted to a DSP processor on the integrated circuit board for computation. The resulting output signal, directly proportional to the actual mass flow rate, delivers unparalleled high performance even under varying process conditions such as changes in pressure, temperature, density, conductivity, and viscosity. The KS100 simultaneously measures mass flow rate, fluid density, and temperature, and outputs all three parameters. The KS100 series of mass flow measurement instruments offers two accuracy classes: ±0.25% for liquid measurements and ±0.5% for gas measurements. This level of accuracy is sufficient to meet the needs of most customers, making the instrument suitable for both laboratory testing and demanding industrial applications. To accommodate challenging industrial environments, certain models are certified to IP67 for dust and water resistance and to IICT4 for intrinsically safe explosion protection. In addition to standard analog input/output interfaces, the KS100 also supports RS-485 and RS-232 communication, using the standard Modbus RTU protocol.
Detailed introduction
Product Features
- Direct measurement of mass flow
- Accuracy for gases can reach ±0.5% F.S., and for liquids ±0.25%.
- No dead zone
- Fast response and fast regulation
- High accuracy and good repeatability.
- Integrated PID controller for flow regulation
- High cost performance
- High reliability, long service life
- No thermal drift; temperature and time drift are negligible.
- Can simultaneously output fluid density and temperature.
- Capable of measuring high-viscosity fluids and high-density gases.
- No significant environmental vibration
Technical Specifications
| Product Name | KS100 Coriolis Mass Flow Meter |
| Measurement range | 0.2 kg/h—5~300 kg/h |
| Flow measurement range ratio | 100:1 |
| Accuracy (gas) | ±0.5% of full scale |
| Accuracy (liquid) | ±0.25% F.S. (full scale) |
| Repeatability | ±0.05% F.S |
| Stability | <±0.1%FS |
| Response time | <0.1s |
| Temperature accuracy | ±0.5℃ |
| Operating temperature | 0–70°C |
| Maximum withstand voltage | 3MPa/10MPa |
| Leak rate | <2×10⁻⁹ SCCSHe |
| Pressure rating | 100bar |
| Base Material | 304L/316L |
| Joint | φ6, φ8, φ10, φ12, flange mounting |
| External sealing material | Metal |
| Enclosure Protection Rating | IP40 |
| Installation Location | Install anywhere |
| Monochrome LED display | Display flow rate and setpoint simultaneously. |
| Electrical Connection | DB9 port, RJ11, 5.5×2.1 power quick-connect |
| Display Status | With LCD display, without LCD display |
| Digital quantity | RS232/485, MODBUS protocol |
| Analog quantity | 0–5 V, 4–20 mA, 1–5 V |
| Power supply | ±15 VDC, 24 VDC |
Industry Applications
| Food industry | Pharmaceutical industry | Semiconductor processing | Fuel cell |
|
|  |  |
Product Inquiry
Attention: Please leave your phone number or email address, and our professionals will contact you as soon as possible!
Related products
Specializing in the R&D, production, and service of online analysis and flow measurement products.
Contact Us
Address:
8th Floor, Aibiao Building Qiantang District, Hangzhou City Zhejiang Province, P.R.China
Phone/WeChat:
Email: